It has been divided in two section: Group A and Group B. Each of 12 bits.

Group A: PA0-PA7 & PC4-PC7(port C upper)

Group B: PB0-PB7 & PC0-PC3(por C lower)

Each group can be programmed separately.

The GA and GB control block receives commands from r/w control logic to accept bit pattern from CPU.

GA(Group A) controls GA ports and GB controls GB ports.

The function of port a and port b is decided by the control bit pattern available in GA and GB control register.

Function of port a and b are also dependent on the mode of operation.

Port C can be programmed separately for port c upper and port c lower.

The port C function is also dependent on the mode of operation.

It can be used as simple i/o, handshaking signals and status signal inputs.

{ 2 comments... read them below or Comment }

  1. I recommend to all This article To every One.
    How to Check Diode Working condition

    Here You Can Find Unlimited Whatsapp group Name For Promoting Your group

    Also You can see This Online Money Earning Ways

    Top 25 Tamil Movies Download Website

    இதுவும் உங்களுக்கு உதவியாக இறுக்கும் நீங்கள் வளர வாழ்த்துக்க்கள் தமிழ் படங்களை பார்க்க 25 website Tamil Movies Website

    You Need Governement Job Then Go to This Link Ind Govt job

    ReplyDelete
  2. I really loved reading your blog. It was very well authored and easy to understand about Blockchain support phone number Unlike other blogs I have read which are really not that good. Thanks!

    ReplyDelete

Labels

- Copyright © 8085 Microprocessor -Metrominimalist- Powered by Blogger - Designed by Johanes Djogan -